© Copyright 2014 G.ANASTASOPOULOS & CO L.P. All Rights Reserved.

Pillow Blocks

UCP

UCP is a pillow block unit with a rigid cast iron housing and two specially designed set screws in the inner-ring spaced at 120 degrees for maximum holding power and reliability for a wide variety of applications and operating conditions. Available from 12 mm & 1/2" to 140 mm bore.

NAP

NAP is a pillow block unit with an eccentric locking collar insert that provides a very secure grip to the shaft that becomes even more secure during continued operation. It is specifically used for single-direction/non-reversing rotation. Available from 12mm & 1/2" to 2-15/16".

NCP

NCP is a pillow block unit with a specially designed concentric locking collar that provides 360 degrees of shaft contact. It produces a more concentric lock on the shaft compared to other locking styles and it functions very well for high speed applications. Available from 20mm & 3/4" to 60mm 2-7/16" bore.

UKP

UKP is a pillow block unit with a tapered-bore bearing insert that utilizes an adapter sleeve assembly to produce a highly concentric and secure lock on the shaft to reduce slippage and fretting corrosion even under adverse conditions. Available from 20mm to 125mm bore.

UCIP

UCIP is a pillow block unit with a highly rigid and rugged casting for particularly demanding applications. The two bolt holes are round for more accurate positioning and the strength ratings of the housing are substantially improved over standard pillow block housings. Available from 40mm & 1-1/2" to 140mm bore and in UK design.

UCPA & UCPAN

UCPA and UCPAN are tapped-base pillow blocks with threaded bolt holes in the bottom of the housings. They are ideal for exact unit positioning and limited space applications. Available from 12mm & 1/2" to 50mm & 2" bore and in NA, NC & UK designs.

UCPH

UCPH is a pillow block unit with an exceptionally high mounting base. It is ideal for applications where a shouldered shaft could create interference with the mounting surface when using a standard pillow block unit. Available from 12mm & 1/2" to 50mm & 2" bore and in NA, NC & UK designs.

BLP

BLP is a compact and lightweight pillow block unit which is ideal for limited space applications and light to moderate duty applications. Available from 12mm & 1/2" to 40mm & 1-9/16" bore and in ALP with SA eccentric locking collar design.

UP

UP is a light duty pillow block unit that has a zinc-alloy housing for a high level of corrosion resistance and it is capable of accepting end covers to increase contamination resistance. Available from 10mm to 30mm bore.

UCSP

UCSP is a pillow block unit that is made entirely out of stainless steel components for the highest level of corrosion resistance for a mounted bearing unit. It is also pre-filled with food grade grease for food processing applications. Available from 12mm & 1/2" to 60mm & 1-7/16" bore.

UCSPA

UCSPA is a tapped-base pillow block unit with threaded bolt holes in the bottom of the housings. It is made entirely out of stainless steel components for the highest level of corrosion resistance for a mounted bearing unit. It is ideal for exact unit positioning and limited space applications. It is also pre-filled with food grade grease for food processing applications. Available from 12mm & 1/2" to 40mm & 1-9/16" bore.

UCVP

UCVP is a pillow block unit with a corrosion resistant thermoplastic housing and the option of either a stainless steel bearing insert or a zinc chromate plated bearing insert. Both bearing inserts offer a high level of corrosion resistance and they are factory lubricated with food grade grease. Available from 20mm & 3/4" to 50mm & 2" bore.

SBPP

SBPP is a pillow block unit with a lightweight and compact stamped steel housing for light to moderate duty applications. Available from 12mm & 1/2" to 30mm & 1-1/4" bore and in SAPP version with SA eccentric locking collar design.

UCF

UCF is a four-bolt flange unit with a rigid cast iron housing and two specially designed set screws in the inner-ring spaced at 120 degrees for maximum holding power and reliability for a wide variety of applications and operating conditions. Available from 12mm & 1/2" to 140mm bore and in UK design.

NANF

NANF is a four-bolt flange unit with an eccentric locking collar insert that provides a very secure grip to the shaft that becomes even more secure during continued operation. It is specifically used for single-direction/non-reversing rotation. Available from 12mm & 1/2" to 60mm & 2-7/16" bore.

NCF

NCF is a four-bolt flange unit with a specially designed concentric locking collar that provides 360 degrees of shaft contact. It produces a more concentric lock on the shaft compared to other locking styles and it functions very well for high speed applications. Available from 20mm & 3/4" to 60mm 2-7/16" bore.

UCSF

UCSF is a four-bolt flange unit that is made entirely out of stainless steel components for the highest level of corrosion resistance for a mounted bearing unit. It is also pre-filled with food grade grease for food processing applications. Available from 20mm & 4/3" to 60mm & 2-7/16" bore.

UCVF

UCVF is a four-bolt flange unit with a corrosion resistant thermoplastic housing and the option of either a stainless steel bearing insert or a zinc chromate plated bearing insert. Both bearing inserts offer a high level of corrosion resistance and they are factory lubricated with food grade grease. Available from 20mm & 3/4" to 40mm & 1-9/16" bore.

UCFL

UCFL is a two-bolt flange unit with a rigid cast iron housing and two specially designed set screws in the inner-ring spaced at 120 degrees for maximum holding power and reliability for a wide variety of applications and operating conditions. Available from 12mm & 1/2" to 130mm bore and in UK design.

NANFL

NANFL is a two-bolt flange unit with an eccentric locking collar insert that provides a very secure grip to the shaft that becomes even more secure during continued operation. It is specifically used for single-direction/non-reversing rotation. Available from 12 mm & 1/2" to 60 mm & 2-7/16" bore.

NCFL

NCFL is a two-bolt flange unit with a specially designed concentric locking collar that provides 360 degrees of shaft contact. It produces a more concentric lock on the shaft compared to other locking styles and it functions very well for high speed applications. Available from 20mm & 3/4" to 60mm 2-7/16" bore.

BLF

BLF is a compact and lightweight two-bolt flange unit which is ideal for limited space applications and light to moderate duty applications. Available from 12mm & 1/2" to 40mm & 1-9/16" bore and in ALF version with SA eccentric locking.

UFL

UFL is a light duty two-bolt flange unit that has a zinc-alloy housing for a high level of corrosion resistance and it is capable of accepting end covers to increase contamination resistance. Available from 8mm to 30mm bore.

UCSFL

UCSFL is a two-bolt flange unit that is made entirely out of stainless steel components for the highest level of corrosion resistance for a mounted bearing unit. It is also pre-filled with food grade grease for food processing applications. Available from 12mm & 1/2" to 50mm & 2" bore.

SBPFL

SBPFL is a two-bolt flange unit with a lightweight and compact stamped steel housing for light to moderate duty applications. Available from 12mm & 1/2" to 35mm & 1-7/16" bore and in SAPFL design with SA eccentric locking collar.

UCVFL

UCVFL is a two-bolt flange unit with a corrosion resistant thermoplastic housing and the option of either a stainless steel bearing insert or a zinc chromate plated bearing insert. Both bearing inserts offer a high level of corrosion resistance and they are factory lubricated with food grade grease. Available from 20mm & 3/4" to 40mm &1-9/16" bore.

UCFA

UCFA is an adjustable two-bolt flange unit with a rigid cast iron housing and two specially designed set screws in the inner-ring spaced at 120 degrees for maximum holding power and reliability for a wide variety of applications and operating conditions. Available from 12mm & 1/2" to 55mm & 2-3/16" bore.

UCFB & UCFBU

UCFB and UCFBU are three-bolt flange brackets with rigid cast iron housings and two specially designed set screws in the inner-ring spaced at 120 degrees for maximum holding power and reliability for a wide variety of applications and operating conditions. Available from 12mm & 1/2" to 50mm & 2" bore.

SATFD

SATFD is a compact and lightweight three-bolt flange unit with square bolt holes for carriage bolts and a ductile iron housing for added strength. It is ideal for limited space applications and light to moderate duty applications. Available from 12mm & 1/2" to 35mm & 1-7/16" bore.

SBPF

SBPF is a round three-bolt flange unit with a lightweight and compact stamped steel housing for light to moderate duty applications. Available from 12mm & 1/2" to 35mm & 1-7/16" bore and in SAPF design with SA eccentric locking collar.

UCT

UCT is a wide-slot take-up unit suitable for use in a side-mount take-up frame. It has a rigid cast iron housing and two specially designed set screws in the inner-ring spaced at 120 degrees for maximum holding power and reliability for a wide variety of applications and operating conditions. Available from 12mm & 1/2" to 140mm bore and in UK design.

NAT

NAT is a wide-slot take-up unit with an eccentric locking collar insert that provides a very secure grip to the shaft that becomes even more secure during continued operation. It is specifically used for single-direction/non-reversing rotation. Available from 12mm & 1/2" to 75mm & 2-15/16" bore.

UCST

UCST is a wide-slot take-up unit that is made entirely out of stainless steel components for the highest level of corrosion resistance for a mounted bearing unit. It is also pre-filled with food grade grease for food processing applications. Available from 20mm & 4/3" to 50mm & 2" bore.

UCC

UCC is a cartridge unit with two specially designed set screws in the inner-ring spaced at 120 degrees for maximum holding power and reliability for a wide variety of applications and operating conditions. The cartridge housing allows for precise shaft mounting and expansion capability where necessary. Available from 12mm & 1/2" to 140mm bore and in NA, NC & UK designs.

UCHA

UCHA is a hanger unit with a threaded-base for simple installation on a threaded pipe mounting configuration. It has two specially designed set screws in the inner-ring spaced at 120 degrees for maximum holding power and reliability for a wide variety of applications and operating conditions. Available from 12 mm & 1/2" to 75 mm & 3" bore.